Similar Products
STIHL
Stihl 18-In Bar with STIHL PICCO Micro 3/8-In PICCO Pitch 0.050-In Gauge 61 Drive Links Chainsaw
{{title}}
{{resource('Product.Label.Sku')}}: {{sku}}
- STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
- Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
- STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
- IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
- Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
Age & Compliance Verification
You may place your firearm order if you agree to the following:
- I certify that I am of legal age to possess a firearm (18 for shotgun or rifle, 21 for all other firearms, including frames/receivers, silencers, and pistol grip smooth bore firearms). All purchasers must be a resident of the state where the transfer will occur. Some states have additional age requirements for certain long gun purchases that may require the buyer to be 21 years of age, or older. Examples of those states include, but may not be limited to: Florida, Washington, and Vermont.
- I certify that I am not legally prohibited from possessing a firearm according to federal, state, and local laws and agree that I cannot take possession of the firearm(s) until I have satisfied the applicable government transfer process in-person at the location where the firearm will be shipped.
- I understand that the item(s) I ordered will arrive at my chosen location and can only be picked up by me, the actual purchaser, with valid government-issued photo identification and any additional documentation as may be required by applicable state law for firearm transfers.
- I agree to present the physical payment card used for my online purchase when picking up my order in-store to confirm the transaction. Failure to provide the card may result in order cancellation.
- I have read, and agree to, the terms in the Privacy Policy and Terms of Use.